Beforeuse This WET/DRY shaver can be used for wet shaving with shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean it in water. The following is the symbol of Wet shaver. The symbol means that the hand-held part may be used in a bath or shower.
Treat yourself to wet lather shaves for at least three weeks and notice the difference. Your Panasonic WET/DRY shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method.
Usingtheshaver Caution - The outer foil is very thin and can be damaged if not used correctly. Check that the foil is not damaged before using the shaver. Do not use the shaver if the foil etc. is damaged as you will cut your skin.
Chargingtheshaver Do not use any charging adaptor other than one specifically designed for this model (RE7-5). Plug in the adaptor into a household outlet where there is no moisture and handle it with dry hands. The shaver may become warm during use and charging. However, this is not a malfunction. Do not charge the shaver where it will be exposed to direct sunlight or other heat sources. Adequate ambient temperature for charging is 0-35 °C. The supply cord cannot be replaced. If the cord is damaged, the appliance should be scrapped.
Cleaningtheshaver Warning - Remove the shaver from the charging adaptor before cleaning it to prevent electric shock. If you clean the shaver with water, do not use salt water or hot water. Do not soak the shaver in water for a long period of time. Wipe it with a cloth dampened with soapy water. Do not use thinner, benzine or alcohol.
Storingtheshaver Remove the shaver from the charging adaptor when storing it. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Keep these operating instructions in a safe place.
SPECIFICATIONS Power source: See the name plate on the product. Motor voltage: 1. V DC Charging time: 8 hours This product is intended for household use only.
Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave.
•
Usingthetrimmer
Slide the trimmer handle up. Place at a right angle to your skin and move downwards to trim your sideburns.
Cleaning
Clean
1. Remove the shaver from the
charging adaptor.
. Apply some hand soap and
some water to the outer foil.
3. Turn the shaver on. . Turn the shaver off after 10-0
seconds.
5. Remove the outer foil section
and turn the shaver on.
6. Clean the shaver and the
outer foil section with running water.
7. Wipe off any drops of water
with a dry cloth.
8. Dry the outer foil section and
the shaver completely.
9. Attach the outer foil section to
the shaver.
blades system outer foil once every year inner blade once ev...
release buttons and lift the system outer foil upwards as illustrated.
. Insert the system outer foil by
pushing it downwards until it clicks.
Replacingtheinnerblades
1. Press the foil frame release
buttons and lift the outer foil section upwards as illustrated.
. Remove the inner blades one
at a time as illustrated.
Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
3. Insert the inner blades one at
a time until they click as illustrated.
•
Cleaningwiththebrush
(A)
(B)
1. Clean the inner blades using
the short brush by moving it in direction (A). Clean the outer foil, the shaver body and the trimmer using the long brush.
Do not move the short brush in direction (B) as it will damage the inner blades and affect their sharpness. Do not use the short brush to clean the outer foil.
Remove the built-in rechargeable battery before disposing of the shaver. Please make sure that the battery is disposed of at an officially designated location if there is one. Do not dismantle or replace the battery so that you can use the shaver again. This could cause fire or an electric shock. Replace it at an authorized service center.
Remove the shaver from the charging adaptor when removing the battery. Perform steps
1
to
8
and lift the battery, and then remove it.
Forenvironmentalprotectionandrecyclingofmaterials This shaver contains a Nickel-Metal Hydride battery. Please make sure that the battery is disposed of at an officially assigned location, if there is one in your country.
•
•
эксплуатации Данная электробритва может использоваться как д...
Мануалза!
Чат поддержки
Комментарии не найденыНе стесняйтесь поделиться с нами вашим ценным мнением.